Corrosion Preventative Powder
CORROSION PROOFER
CPT-500 POWDER
CPT-500 is a water-soluble
powder containing CPT Technology. Designed for wet or dry corrosion
protection of all ferrous and non-ferrous metals including aluminum. CPT's migrational action ensure corrosion prevention throughout your system or product.
No CPT 500 / With CPT 500 |
- Provides monomolecular inhibiting layer
- For Dry Applications use approximately 2 ounces of powder to protect
up to 1.0 cubic foot
- For Aqueous Applications with average environmental conditions,
use 2.5% to 5% CPT-500 by weight of water. The dosage can be increased
for more severe conditions
- Provides up to 60 months of continuous protection
-
Provides liquid, vapor and interface protection
above and below liquid levels
- Creates a durable monomolecular inhibiting layer on metal surface
- Does not contain phosphates, nitrites or heavy metals
- Can be used as an additive or as an end user product
- 100% Biodegradable, non-toxic, does not contain any heavy metals
and is environmentally friendly
BENEFITS
- Vapor-phase inhibiting action protects inaccessible and recessed
surfaces
- Products can be shipped to customers without ever removing the powder
- No regeneration is required as CPT will regenerate itself
- CPT-500 is extremely healthy for internal systems
- If the CPT-500 layer is disturbed by moisture or the opening of
an enclosed space, the layer is replenished by continuous vapor redeposition
- No surface preparation is required
- Prevents corrosion on pre-coated and painted surfaces
- Does not increase alkalinity
- Provides economical protection for very large applications
- 100% biodegradable and environmentally friendly
- CPT-500 layer does not need to be removed prior to processing
APPLICATIONS
- Additive to standing water
- Additive to water systems or water based coating systems
- Voids, cavities and tanks
- Hydro test Additive
- Additive for infinite existing chemical formulations
- Tubular structures, pipes and vessels - dry or wet
- Equipment during and after hydrotesting
- Additive to shot-blasting media
- Equipment, parts, components etc. in packaging, shipping and storage
- Internal surfaces of compressors, turbines, engines, tanks, boilers, heat exchangers
- Steam condensate lines, closed circuit heating and cooling towers and systems
- Parts, components and completed assemblies during shipping and storage
EXAMPLE APPLICATION
CPT-500 can be added to hydrotest
water. This solution is drained and the vessel sealed after completion
of the test. CPT-500 is also typically blown into pipes or cavities
with the openings closed or sealed afterwards.
METHOD OF APPLICATION
Apply CPT-500 by dusting,
fogging or sprinkling. Apply CPT-500 in aqueous form by spray, brush,
flush or immersion. After application, simply cover or seal the interior
cavity or void. Fogging is easily achieved by using a low-pressure air
hose and sandblast cup. Large, conventional sandblasting systems can
also be used. For Dry Powder Application with average environmental
conditions, use per 0.4 ounces of CPT-500 per 1 cubic foot (28 liters)
of enclosed space. The dosage can be increased for more severe conditions.
For Aqueous Applications with average environmental conditions, use
1.5% to 2% CPT-500 by weight of water. The dosage can be increased for
more severe conditions.
PROPERTIES
Appearance - White crystalline
Powder
PH - 6.5-6.9 (1% aqueous solution)
PACKAGING & STORAGE
CPT-500 is available in standard 22-pound pails or 150-pound drums.
Store in a sealed container in a dry warehouse,
and avoid direct exposure to sunlight with temperatures not exceeding
150°F (66°C). Under these conditions, shelf life is up to 24 months.
Corrosion Proof Powder Product Data Sheet
Corrosion
Proof Powder MSDS (Password protected)
Corrosion Prevention Products Brochure
(You will need Adobe's free Acrobat Reader to view these files.)
Click here to go to the online store
|
